[. . . ] INSTRUCTION HANDBOOK Please read the instruction handbook before using the copier. Keep it close to the copier for easy reference. As an ENERGY STAR Partner, KYOCERA MITA CORPORATION has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The ENERGY STAR program is an energy reduction plan introduced by the United States Environmental Protection Agency in response to environmental issues and for the purpose of advancing the development and utilization of more energy efficient office equipment. registered mark. In this Instruction Handbook, the 1810 is referred to as the 18 ppm (pages per minute) copier and the 1510 is referred to as the 15 ppm copier. All rights reserved. [. . . ] (Inch specifications) (Metric specifications) 2 Change the displayed zoom ratio using the Number of Copies/Zoom (+) key or Number of Copies/Zoom (-) key. (English text panel) (Symbol panel) 2 Each time you press the Size Select key, the standard zoom ratios appear on the copy magnification display in order. (English text panel) (Symbol panel) 3 Press the Zoom Input/Enter key. The zoom ratio will be set and the display indication changes from the magnification to the number of copies. (English text panel) (Symbol panel) 3 Press the Zoom Input/Enter key. The zoom ratio will be set and the display indication changes from the magnification to the number of copies. 4-3 CHAPTER 4 BASIC OPERATIONS 3. Energy saver (auto preheat) function This function automatically puts the copier in the sleep mode if no copying operation is performed for a certain period of time (5 to 45 minutes). In sleep mode, "---" is displayed on the copy quantity/ magnification display and all other indicators are turned off. * To resume copying after the energy saver (auto preheat) function has been activated, press any of the operation section keys. The length of time that the copier uses to recover from the energy saver (auto preheat) function can be selected between within 10 seconds (priority to recovery) and within 30 seconds (priority to power save). (See "Auto preheat time" on page 6-4 and "Preheat recovery time" on page 6-5. ) (English text panel) (Symbol panel) 4. Auto shut-off function This function automatically turns the main switch OFF (O) if no copying operation is preformed for a certain period of time (15 to 120 minutes). * If the optional printer board is installed, copying will be enabled when any of the operation keys is pressed or data is received from the computer. q Auto shut-off function The auto shut-off function is a power-saving feature which automatically turns OFF (O) the main switch when a certain time elapses without copying being performed. Copiers are generally in the standby mode more than operation mode, and power consumption in the standby mode occupies a large part of overall consumption. Having the copier turn OFF (O) automatically reduces unnecessary power consumption in the standby mode or at night when the copier is left on. * To change the time until the auto shut-off function starts, see "Auto shut-off time" on page 6-4. To cancel the auto shut-off function, see "Auto shut-off" on page 6-4. 4-4 CHAPTER 5 FUNCTIONS 1. Layout copying Two or four originals can be combined into a single copy. The borderline of each original can also be marked with a solid line or dotted line. Setting originals (18 ppm copier) Original setting location Original DF Platen P L * The 15 ppm copier requires the optional memory copy board to perform layout copying. * The default borderline can be set (see "Layout (borderline)" on page 6-4). [. . . ] Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Paper feed system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Copy paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Continuous copying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Light source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Developing system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]